EPOXY PRIMER BLACK 1:1
DESCRIPTION
Epoxy Prime™ two-component, chromate-free epoxy is designed for use as medium fill primer that provides optimum adhesion with excellent corrosion protection for bare substrates. Epoxy Prime™ may also be applied as a sealer to ensure greater inter-coat adhesion, chemical resistance, and color holdout. Features a full epoxy resin that utilizes a non-induction catalyst, used to increase productivity for automotive and fleet refinishing. If required, we offer a 3.5 VOC catalyst, used for fleet and light industrial applications.
FEATURES
- Good Color Holdout
- Standard/Low 3.5 VOC Option
- Chromate-Free
PRODUCT DETAILS
Type | Primer |
Substrates | Properly
cleaned and conditioned steel, stainless, aluminum, galvanized
steel, copper, and brass. Thoroughly sanded OEM and cured paint. Cured and sanded body filler. Sanded Fiberglass and SMC. Properly prepared plastic. Note: Do Not use over soluble substrates, DTM, Acid Etch Primer, lacquer primer or lacquer finishes. |
VOC | 4.6 lbs/gal (551 g/l) |
AVAILABLE SIZES
Size | Case Qty | UPC | GMC |
---|---|---|---|
Quart | 12 | 842027102875 | |
Gallon | 4 | 842027102868 |
MIXING INSTRUCTIONS
Components | Parts by Volume |
---|---|
PS3045 | 1 |
PA3040E | 1 |
Components | Parts by Volume |
---|---|
PS3045 | 1 |
PA3040E | 1 |
TH0860/TH0870/TH0885/TH0895 | 1/4 |
Pot Life | 16 hours @ 75°F/23°C |
APPLICATION INSTRUCTIONS
Application
PRIMER APPLICATION
Apply in single wet coats, allowing 15 minute, flash
between coats. Apply 1 - 2 coats, depending on desired film build.A light coat
of body filler may be applied over 1 coat of Epoxy Prime™ after 2 hours at
75°F/23°C. If two coats of Epoxy Prime™ are applied, wait overnight before
applying filler.
SEALER APPLICATION
Apply 1 single wet coat of Epoxy
Prime™ reduced as a sealer, to create a uniform base. Allow to flash for 45 - 60
minutes at 75°F/23°C before applying topcoats.
Gun Setup & Air Pressure
Refer to Technical Data Sheet.
Dry Time
Air Dry | Force Dry |
---|---|
To sand Primer: Best Overnight Sealer: 30 - 45 minutes per coat at 75°F/23°C if removing debris | |
To topcoat Primer: 1 hour per coat to 24 hours at 75°F/23°C Sealer: 45 minutes per coat to 6 hours at 75°F/23°C |
Coverage (Ft2) | 529 |
Dry Film Thickness (mil) | Mix 1:1 1.0 + 0.2 mils per coat; Mix 1:1:1/4 .8 + |
Part #: MO.PS3045
Price and Units
Units: QUART
Units: QUART Product Links: MSDS - Primer MSDS - Activator Technical Data Sheet Product Brochure |
Units: GALLON
Units: GALLON Product Links: MSDS - Primer MSDS - Activator Technical Data Sheet Product Brochure |
Customers Who Looked At This Item Also Looked At:
EPOXY ACTIVATOR NON-INDUCTION
Part #: MO.PA3040E |
|
EPOXY PRIMER LIGHT GREY 1:1 |
|
EPOXY PRIMER BLACK 1:1 |
|
EPOXY PRIMER YELLOW 1:1 |
|