RPS CUP 0.9 LIT 125M CS/40
SATA® RPS™ cup system
The mixing cup system for painting, refilling
and storing paint
SATA RPS
(Rapid Preparation System) is the cup
system for bodyshops emphasising perfect painting finishes and high efficiency.
SATA RPS
facilitates the painters’ work, significantly enhances the
bodyshops’ productivity and critically reduces the use of cleaning agents and
solvents. Learn more about the specific features of SATA RPS
and the
advantages you will have!
One cup – four functions
mix paint
paint
refill the paint
store the paint
With only three components!
SATA RPS
consists of 3 components only which means less handling efforts and
thus, less expenditure of time
a cup
a lid
a sieve
No
additional components are necessary. There is no other cup system with the same
functions but with three components only!
No compromise – no adapters
SATA paint spray guns with QCC (Quick Cup Connector) are equipped with very
short material passages without any needless rough edges. This feature prevents
material deposits in the paint spray gun and allows easy and thorough cleaning.
These advantages remain completely unchanged with the use of RPS as it
is the only cup system that fits directly on your SATA paint spray gun without
adapter. By combining SATA RPS and SATA paint spray guns with QCC, you will have
the best possible basis for top quality paint jobs.
Furthermore, with
the use of RPS, your SATA paint spray gun remains its low centre of gravity and
thus remains perfectly balanced. Even the extremely low weight of RPS
contributes to fatigue-free work: cup and lid of the 0.3l version have a weight
of 34g, the 0.6l version weighs 55g and the 0.9l version weighs 65g.
Is
there another reason to accept compromise?
Perfect – the paint finish
RPS is based on the reliable flow cup principle. The continuous cup ventilation
via the anti-drip device ensures a steady material flow – a basic condition for
high colour match precision.
By the way, this is exactly the reason why
leading paint manufacturers use flow cups for the development of paints and for
testing their colour shades.
Cup sizes
SATA RPS is available in three
cup sizes, namely 0.3l, 0.6l and 0.9l.
Both lids and sieves are identical for
0.6l and 0.9l cups. Thus, the total number of the various components remains
clear. By the way, lids and sieves can be ordered separately.
The 0.3 l
cups are available with two different spray gun connections:
SATA RPS
0.3
l Standard – fits on the same spray gun types like the sizes 0.6 l and 0.9 l.
SATA RPS
0.3 l minijet – fits on SATA minijet spray guns until minijet 3000 B
and SATAjet 20 B
Economical
The cleaning of the cup is not necessary
with SATA RPS, thus saving time, cleaning agents and cost. Perfect colour match
and perfect paint jobs reduce time and cost intensive rework. And the very few
components additionally facilitate the entire work process - simplicity pays.
Testing is free of charge
Ask your SATA dealer for a demonstration of
SATA RPS in your bodyshop and see for yourself of the advantages – free of
charge and without obligation.
For the application of UV paints, the RPS
0.6 l cup is also available in a black dyed version protecting the paint inside
the cup from hardening. A useful accessory for air caps of SATAjet 3000 and
SATAjet 2000 as well as SATAjet RP spray guns are the UV protectors.
Adapters
Contrary to other disposable cup systems, SATA RPS does not require
any adapter in combination with SATA paint spray guns. Therefore, the spray gun
can be easily and reliably cleaned. RPS adapters - For older SATA paint spray
guns and spray guns of other manufactures Spray gun adapters are available.
Part #: SA.118471
Price and Units
Units: CSE/40
Units: CSE/40 Product Links: Product Information |