BLACK DTM PRIMER
DESCRIPTION
PS3201™/PS3203™/PS3205™ is a non-isocyanate, chromate-free, direct to metal primer that provides optimum adhesion with excellent corrosion protection on bare metals and OEM substrates. These primers are designed for use as a medium or high build primer-surfacer that easily sands by hand or machine, while offering superior color holdout and gloss retention for fast, high quality finishes.
FEATURES
- Optimum Adhesion
- Normal to High Build
- Superior Color Holdout
PRODUCT DETAILS
Type | Primer-Surfacer |
Substrates | Properly
cleaned steel, aluminum, galvanized steel, fiberglass and SMC. Thoroughly scuffed OEM E-coat and sanded cured paint. Cured, sanded body filler. Properly prepared plastic. Note: Do Not use over lacquer primer or lacquer finishes. |
VOC | Mix 4:1:½ 4.13 lbs/gal (412 g/l); Mix 4:1:1 4.39 lbs/gal (438 g/l) |
AVAILABLE SIZES
Size | Case Qty | UPC | GMC |
---|---|---|---|
Quart | 4 | 842027102967 | |
Gallon | 12 | 842027102950 |
MIXING INSTRUCTIONS
Components | Parts by Volume |
---|---|
PS3205 | 4 |
PA3200M/PA3200S | 1 |
TH0860/TH0870/TH0885/TH0895 | 1 |
Pot Life | 2 hours @ 77°F/23°C |
APPLICATION INSTRUCTIONS
Application
Apply in single wet coats, allowing 5- 10-minutes flash at 75°F/23°C between coats. For normal build, apply 2-3 coats, depending on desired film build. For high build, we suggest 2 coats maximum. If three coats are applied, allow for overnight drying. Body filler may be applied 1 hour after a single coat of PS3201™/PS3203™/PS3205™ has been applied. Additional heat may be applied to speed curing and drying. Allow to cool before sanding. Brushable / Rollable Option Mix according to directions. Note: The use of slower reducers will increase flow and leveling. Apply 1 even coat of PS3201™/PS3203™/PS3205™, making sure to cover the repair area completely into the featheredge. Before the 2nd coat is applied, allow a 10 minute flash between coats. Apply the 2nd coat within the previous coats outer edge. For best results, do not apply more than 3 coats.
Gun Setup & Air Pressure
Refer to Technical Data Sheet.
Dry Time
Air Dry | Force Dry |
---|---|
To sand 45 - 60 minutes per coat at 75°F/23°C | |
To topcoat 4 - 6 hours after sanding. |
Coverage (Ft2) | Mix 4:1:½ 691; Mix 4:1:1 |
Dry Film Thickness (mil) | Mix 4:1:½ 2.0 ± .5 mils per coat; Mix 4:1:1 1.5 |
Part #: MO.PS3205
Price and Units
Units: GALLON
Units: GALLON Product Links: Product Brochure DTM MSDS Activator MSDS Technical Data Sheet |
Customers Who Looked At This Item Also Looked At:
WHITE DTM PRIMER |
|
GRAY DTM PRIMER |
|
MEDIUM DTM ACTIVATOR
Part #: MO.PA3200M |
|
SLOW DTM ACTIVATOR
Part #: MO.PA3200S |
|
2K DTM BLACK PRIMER / SEALER |
|