BLUE SHIELD LIQUID SPRAY MASK
AP300™ Blue
Shield™ Liquid Spray Mask is designed to replace plastic sheeting or car covers
and provides start to finish protection. This water based ready-to-spray liquid
mask is fast and easy to apply and dries to a tack-free film that can be taped
and re-taped during border masking with paper. AP300™ can be baked multiple
times at temperatures up to 170°F / 76°C. One even coat protects any part of the
vehicle including grills, wheel wells, engine compartments, and vinyl tops.
· Easy to Apply
· Single Coat
· Water Based
· Dries to Tack-Free Film
· Easy Clean-Up
· Also Available in 53 Gal Drums
APPLICATION
• Montana Big Sky® AP300™ Liquid Spray Mask may be applied
using conventional, HVLP, or airless spray equipment.
• Suggested Fluid tips range from 1.6mm to 1.8mm.
• Border mask around the area to be painted with 18” paper.
• Fold masking paper back over repair area.
• Apply one-single wet coat of AP300™ Liquid Spray Mask to
the surfaces to be protected. This includes windows, wheels and tires, door
jams, and cured painted surfaces.
Tip: Apply only enough material to maintain a complete
protective film. Excessive film build will require longer rinsing to remove from
the surface.
• Allow AP300™ to dry. Fold paper over onto the surface and
tape. To minimize or eliminate additional taping, fold the paper over in the wet
spray mask.
• Finish repair area.
• AP300™ Liquid Spray Mask is easily removed with water and
a wash mitt during the wash and detail period.
Part #: MO.AP300-5
Price and Units
Units: 5GAL
Units: 5GAL Product Links: MSDS Technical Data Sheet |
Units: DRUM
Units: DRUM Product Links: MSDS Technical Data Sheet |
Customers Who Looked At This Item Also Looked At:
LIQUID MASK (5-GALLON) |
|