Copper Coated Mild Steel Rod
General purpose wire containing higher level of manganese and silicon. Copper coated wire for all thin gauge mild steel welding. Produces a quiet, highly stable arc, even on steels having moderate rust or mill scale. Runs best DC reverse with CO2, at a gas flow rate of 20-30 cubic feet per hour. Excellent flow properties.
Here are some good rules of thumb to help you select the correct filler metal:
1. 4043 is a good general
filler metal for most aluminum applications. Remember 2xxx and 7xxx series
aluminum is generally not recommended if the application requires welding.
2. 5356 is used for 5xxx series aluminum and is generally preferred if the finished piece will be anodized.
3. ER70S-6 is generally used for mild steel welding.
4. ER70S-2 is highly recommended for welding 4130 chrome moly tubing in many applications.
5. ER80S-D2 is recommended for welding 4130 chrome moly tubing if a higher strength, less ductile weld is required. If your weld will be heat treated to obtain optimum strength, then use a filler metal which matches the chemistry of your tubing, which neither 70S-2 nor 80S-D2 wires do.
6. Generally speaking, use a 1/16" diameter filler rod for applications where the material is 1/8" and less. Use a 3/32" diameter rod for 1/8" and thicker.
2. 5356 is used for 5xxx series aluminum and is generally preferred if the finished piece will be anodized.
3. ER70S-6 is generally used for mild steel welding.
4. ER70S-2 is highly recommended for welding 4130 chrome moly tubing in many applications.
5. ER80S-D2 is recommended for welding 4130 chrome moly tubing if a higher strength, less ductile weld is required. If your weld will be heat treated to obtain optimum strength, then use a filler metal which matches the chemistry of your tubing, which neither 70S-2 nor 80S-D2 wires do.
6. Generally speaking, use a 1/16" diameter filler rod for applications where the material is 1/8" and less. Use a 3/32" diameter rod for 1/8" and thicker.
We offer you high quality
Filler Rod in affordable quantities packaged to keep your Filler Rod fresh
and contaminant free.
Part #: HTP.70S6-3/32-36
Price and Units
Units: 5LB
|
Units: 5LB |
HMS Warehousing Corporation
