VHT FLAT WHITE AEROSOL 2000F

VHT FLAMEPROOF™ COATING

VHT FlameProof™ Coating will renew and extend the life of any surface exposed to extremely high temperatures. This unique coating is a matte finish, silicone ceramic base widely used by the automotive industry on exhaust systems and the aerospace industry for jet engines, re-entry vehicles and other high temperature applications. VHT FlameProof™ Coating will withstand temperatures up to 2000°F (1093°C) and is ideal for use on headers, exhaust systems, or wherever an extreme temperature coating is needed.

Temperature: 1300°F-2000°F (704°C-1093°C)

Applications: Headers, Exhaust Manifolds, Piston Domes, Inside Heads

Finish: Flat

Dry Time: Curing time required and can be done on or off vehicle (see below)

Curing FlameProof™

VHT FlameProof™ Coating only attains its unique properties after correct curing (refer to instructions on the can).

On the Vehicle

• Paint must be completely dry before curing
• Run at idle for 10 minutes
• Cool for 20 minutes
• Run at idle for 20 minutes
• Cool for 20 minutes
• Run under normal operating conditions for 30 minutes

Off the Vehicle

• Paint must be completely dry before curing
• Heat to 250°F (121°C) for 30 minutes
• Cool for 30 minutes
• Heat to 400°F (204°C) for 30 minutes
• Cool for 30 minutes
• Heat to 650°F (343°C ) for 30 minutes

Caution: Do not exceed the temperature of the least heat tolerant component or the base metal

Coating System

VHT provides a multi-high performance coating system for the ultimate in protection and quality. The system includes surface preparation, primer, paint and clear coat.