//

DTM EPOXY PRINMER/SEALER GRAY

#325 HIGH BUILD 2K GRAY DTM PRIMER FILLER/SEALER - 2.1 VOC

PRODUCT DESCRIPTION:
ADVANTAGE #325 Primer is formulated with a hybrid of epoxy and acrylic polymers, which provide excellent adhesion, good corrosion resistance, productive dry times, and ease of sanding.

SURFACE PREPARATION:
Clean all areas to be primed with compliant Wax & Grease Remover to remove all dirt, wax, grease, and other contaminants. Featheredge and sand the original finish. Surface must be clean and dry. Note: Rust and oxidation must be removed prior to applying primer by sanding, grinding, or sand blasting.

MIXING DIRECTIONS:    
High Build
Primer Filler
Regular Build
Primer Filler
 
Primer Sealer
4 PARTS #325 Primer
1 PART #326 Activator
4 PARTS #325 Primer
1 PART #326 Activator
1 PART Urethane Reducer -
Nat’l Rule Acetone - California
4 PARTS #325 Primer
1 PART #326 Activator
2 PARTS Urethane Reducer - Nat’l Rule Acetone - California
 

APPLICATION DIRECTIONS & POT LIFE:
Spray one to three medium wet coats allowing 10-20 minutes flash between coats. Pot Life is: 2-3 hours @ 77° F.

ADDITIVES:  
ACCELERATOR: N/A FISHEYE: N/A
 
FLEX ADDITIVE: Not required Note: Do not spray when surface temperature is
below 50°F
 

CLEAN-UP:
Clean spray equipment immediately after use with Virgin Wash Thinner.

SUBSTRATES:
Properly cleaned and sanded aluminum, steel, galvanized steel or sand blasted steel. Properly cleaned and sanded fiberglass, SMC, E-Coat and OEM finish.

GUN SETUPS: AIR PRESSURES    
CONVENTIONAL CONVENTIONAL @ Gun PANEL OVERALL
Gravity Feed:
1.6 mm - 2.0 mm
Gravity Feed: 30-35 psi 40-45 psi
Siphon Feed:
1.8 mm - 2.0 mm
Siphon Feed: 30-40 psi 45-55 psi
HVLP:
1.6 mm - 2.0 mm
HVLP @ Cap: 6-8 psi 8-10 psi

 

FLASH/DRY TIMES:   Please Note:
AIR DRY @ 77°F Flash between coats:
10-20 Minutes
 
Reduction may accelerate flash times.
  To Sand: 60-90 Minutes  
  To Topcoat: 30 Minutes* *Topcoat without sanding -
24 hrs max

 

TECHNICAL DATA:  
Volume Solids: 45.7% (RTS) Regulatory VOC: 204 g/L (1.7 lbs./gal.)
 
Pot Life: 2-3 Hours @ 77°F Actual VOC: 146 g/L (1.21 lbs./gal.)

Part #: ADV.32504

Price and Units

Units: QUART

Units: QUART
Product Links:
MSDS
Technical Data Sheet
Product Description


Customers Who Looked At This Item Also Looked At:

DTM EPOXY PRIMER /SEALER GREY

Part #: ADV.32501
More Info


ACTIVATOR FOR 325 PRIMER

Part #: ADV.32604
More Info


ACTIVATOR FOR 325 PRIMER

Part #: ADV.32616
More Info


//