//


PANEL BONDING ADHESIVE 3.75ML

3M™ Panel Bonding Adhesive, 50 mL, 38315

  • Part Number: 38315
  • UPC: 00051131383159
  • Stock Number: 60455069686
Two-part epoxy used to bond steel, aluminum, SMC, and FRP (traditional fiberglass). The primary use is to replace quarter panels, roofs, box sides, van sides, utility vehicle sides and door skins.

3M Selected as Approved Source for Rivet-Bonding Adhesives and Repair Tools 

This product is not intended to bond structural components of a vehicle such pillars, rockers, or frame members. If doubt exists as to whether a particular component is structural, then that component should be welded. 

Product Description

3M™ Panel Bonding Adhesive is a two-part epoxy adhesive which provides extended work-time but can be rapidly cured with heat. It is packaged in a 37.5 ml cartridge and is to be used in conjunction with our 08190 Performance Manual Applicator and 38191 or 38193 Static Mixing Nozzle. 

Panel Bonding Adhesive has excellent adhesion to a wide variety of plastic and metal substrates. When the manufacturer's directions are followed, this product can be used to bond door skins, roof skins, quarter panels and box sides. In addition, product can be used for bumper cover repair under certain conditions. Typical substrates include cold roll steel, aluminum, SMC, and FRP. 

This product is not intended to bond structural components of a vehicle such pillars, rockers, or frame members. If doubt exists as to whether a particular component is structural, then that component should be welded. 
  • For use on outer body panels only. Not for use on structural components such as pillars, frame rails, core supports, or rocker panels (on unibody vehicles). Cures on demand with addition of heat. Glass beads work as built-in spacers for optimum bond line.
    • A high performance two component epoxy adhesive.
    • Bonds a variety of steel, aluminum, SMC, and FRP (traditional fiberglass) non-structural components. Also use to reinforce welded or riveted structural components.
    • Use with 08190 Performance Manual Applicator and 38191 Static Mixing Nozzle.

  • Additional Product Information

    3M Part Number 38315
    UPC 00051131383159
    Case Inner Pack 1 Syringe per package
    Size 50 mL
    Work Time 4 Hours
    Paint Time 24 Hours
    Brand 3M

Part #: 3M.38315

Price and Units

Units: EACH

Units: EACH
Product Links:
MSDS
Technical Data Sheet
//